Here's a usefull little tip for you,
if your running an external positioner
or even a V-Box, to control your dish,
then by setting the satellites in order can save you time and effort.,
for example: if you were to save your satellites in order such as :-

1 = Astra 19.2E         
2 = Eutelsat W2 16E
3 = Hotbird 13e        
4 = Eutelsat W1 10E
And so on ...

So when it comes to storing the satellite positions,
you can simply enter the numbers that corespond to each satellite,
in the stored position option.
I have been doing it this way for a number of years,
using various receivers, and it can save you a lot of time especially
if you already know the satellite numbers, as the V-Box will retains
the stored satellite positions.
Which means that whenever you install another Image,
the satellite positions are never lost, or require setting up again.

Accessing the DB800 browser options

Open your Internet Browser, and then type in your QBox IP address.
IP will look simular to this [192.168.0. 3]  so just type in the following: http://192.168.0.3
and then check out the options open too you there,
and that may well keep you occupied for a while.

All the best 'Laurals'

Click Here for additional Help