Auto re-boot after uploading firmware

To get the Passion to auto re-boot after an update,
all you have to do is remove the USB Stich when
the 'Erase Flash' starts, then once the 'Burning'
has completed, the Passion will re-boot automatically.

Deleting Transponders from the TP/Sat list

Be sure you delete the correct transponder
as you will also delete all channels associated
with the transponder as well, so if in doubt, don't delete.

EPG re-booting problem fix

If any of you find that the Passion re-boots everytime
you select a channel while in EPG Mode, a simple fix for
this is to remove the sim card from the Dragon/T-Rex or
Diablo cam, this is especially true if the card has in fact
expired, that should then stop any re-booting issues.

So as you can see, the re-booting problem was not in fact
associated with the Passion, or it's firmware, but with the
expired sim card.

Connecting the Passion to a surround sound system

If you connect the Passion to a surround sound amp via an optical cable, then do the following to access both AC3 and Stereo audio:
Menu -> System Settings -> TV Settings
now make sure the Digital Audio is set to Off, and then all will be okay.

Changing the Audio language on channel

First click the Red button on the remote control.
The default is the first option, if your prefered language is not displayed.

To select the English audio, select Track 2: dos

Now click OK to exit, and the audio will now be transmitted in English

All the best 'Laurals'

Click Here for additional Help