Humax HDCI-2000 High
Definition Satellite Receiver
Opening the Front Pannel reveals the two
C.I Slots
Front view with pannel closed.
View of the back showing the connectivity.
1 LNB IN 2 LNB OUT
3 Host USB 4 TV Scart 5 VCD
Scart
6 Audio L / R 7 Video
8 HDMI 9 S/PDIF 10 RS-232 C
11 Power
Connecting your Humax to a HDTV:
HDMI = High Definition Multimedia
Interface
DVI = Digital Video Interface
To correctly receive and view HD Transmitions
wheather from TV / Sat Broadcasts or Directly
from a game consoles, you will be required to connect
either your receiver, or console, to a HDTV, using
either a DVI or HDMI lead.
Some HDTV's may only have a DVI input, many will have both a DVI & HDMI input
if you have one with only a DVI input
then the cable supplied with your Humax HDCI-2000
will need to be changed to a HDMI -> DVI cable
or you could simply get yourself a HDMI -> DVI converter
Above HDMI to DVI Lead
Below: HDMI - DVI Converter
High-Definition Multimedia Interface
(HDMI)
Male to Digital Visual Interface (DVI-D)
Male Single Link Cable.
HDMI is fully backward-compatible with DVI
that handles digital data transfers at rates up to 5 Gbps.
HDMI provides an interface between any HDMI-enabled audio/video source, such as a set-top
box, DVD player, and A/V receiver and an audio and/or video monitor or projector.
HDMI supports standard, enhanced, or high-definition video, plus multi-channel digital
audio on a single cable.
It transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth
to spare to accommodate future enhancements and requirements.
All above support the following
screen resolutions:
480i
480p
720p
1080i
Switch Box:
Does your HDTV only have one HD input ?
And you now need more ?
If your HDTV only has one HD port and you have more than one device then you may be want
to consider getting yourself a 2 or 5 port HDMI switch box.
The box will allow you to switch between your devices without needing to constantly change
the cable which is connected to the back of your HDTV.
Also supplied is a full 21 pin Scart Lead
for use on non HDTV's as you can use this
receiver to view satellite HD Broadcasts
on a non HDTV, but you will not get the
full benefit of the picture quality on a non HDTV
